JaySafe Systems - Home Page JaySafe Systems
Ford Transit '07 - Reset
Electrical controls

Home Page

Tech Index

SR BackUp

ATC Tumbler



RJ45 PinOuts


CHY 650
msodi error
RAM memory
Sky rcu
XP from usb

Ford Transit '07 - reset "Service oil now".

This quick-fix is a reminder of how to reset the "service oil now" warning message.

Carry out the required oil change

Close the bonet & door

Turn on the ignition but don't start the engine.

Hold down the brake and accelerator

The display will show 'Service oil now reset in progress'

'Service oil now reset complete'

Release the brake and accelerator; and switch off the ignition.

Ford Transit '05 - Access dtc menu.

This quick-fix is a reminder of how to access the diagnostic trouble codes.

Hold down the trip counter reset button and turn on the ignition but don't start the engine.

After ten seconds the display will change to test, release the button

Each button press will cycle through :
  • Shows a Gauge Sweep
  • Shows all 8's on the LCD (LCD TEST)
  • Illuminates all the bulbs on the dash
  • Displays hexadecimal value for ROM level
  • Displays the hexadecimal value for EE level
  • Shows DTC (Diagnostic Trouble Code)
  • Digital Speedometer - mph
  • Digital Speedometer - kph
  • n/a
  • Digital tachometer
  • Fuel volume
  • Engine coolant temperature
  • Battery voltage
  • ABS fail
  • Illumination
  • Crank sense
Switch off the ignition

Source References :

Internet Content Rating Association Add JaySafe to my favourites. Make JaySafe my Home Page.
Send an email to WebSiteMaster with questions or comments about this site.
Copyright ? 2001 JaySafe Systems. Last modified: 22 July 2016.
Visitor No